SectionXV – Chapter 72 – 72.01 /04₁

Heading No.	H.S. Code	Description	CD	CBT	IC	Remarks	SUQ
		l.-PRIMARY MATERIALS; PRODUCTS IN GRANULAR OR POWDER FORM
72.01		Pig iron and spiegeleisen in pigs, blocks or other primary forms.
	7201.10	- Non – alloy pig iron containing by weight 0.5 % or less of phosphorus	Nil	5	12		Kg
	7201.20	- Non – alloy pig iron containing by weight more than 0.5 % of phosphorus	Nil	5	12		Kg
	7201.50	- Alloy pig iron; spiegeleisen	Nil	5	12		Kg
72.02		Ferro- alloys.
		- Ferro- manganese:	Nil	10	12		Kg
	7202.11	-- Containing by weight more than 2 % of carbon	Nil	5	12		Kg
	7202.19	-- Other	Nil	5	12		Kg
		- Ferro – silicon:
	7202.21	-- Containing by weight more than 55 % of silicon	Nil	10	12		Kg
	7202.29	-- Other	Nil	10	12		Kg
	7202.30	- Ferro – silico – manganese	Nil	5	12		Kg
		- Ferro- chromium:
	7202.41	-- Containing by weight more than 4 % of carbon	Nil	10	12		Kg
	7202.49	-- Other	Nil	5	12		Kg
	7202.50	- Ferro- silico- chromium	Nil	5	12		Kg
	7202.60	- Ferro-nickel	Nil	5	12		Kg
	7202.70	- Ferro-molybdenum	Nil	10	12		Kg
	7202.80	- Ferro-tungsten and ferro-silico-tungsten	Nil	5	12		kg
		- Other:
	7202.91	-- Ferro-titanium and ferro-silico-titanium	Nil	5	12		Kg
	7202.92	-- Ferro-vanadium	Nil	5	12		Kg
	7202.93	--Ferro-niobium	Nil	5	12		Kg
	7202.99	-- Other	Nil	15	12		Kg
72.03		Ferrous products obtained by direct reduction of iron ore and other spongy ferrous products, in lumps, pellets or similar forms; iron having a minium purity by weight of 99.94%, in lumps, pellets or similar forms.
	7203.10	- Ferrous products obtained by direct reduction of iron ore	Nil	5	12		Kg
	7203.90	- Other	Nil	5	12		Kg
72.04		Ferrous waste and scrap; remelting scrap ingots of iron or steel.
	7204.10	- Waste and scrap of cast iron	Nil	5	1		Kg
		- Wste and scrap of alloy steel:
	7204.21	- Of stainless steel	Nil	5	12		Kg
	7204.29	-- Other	Nil	5	12		kg

Heading N.	H.S. Code	Description	CD	CBT	IC	Remarks	SUQ
	7204.30	- Waste and scrap of tinned iron or steel	Nil	5	12		Kg
		- Other waste and scrap:
	7204.41	-- Turnings, shavings, chips, milling waste, sawdust, filings, trimmings and stampings, whether or not in bundles	Nil	5	12		Kg
	7204.49	-- Other	Nil	5	12		Kg
	7204.50	- Remelting scrap ingots	Nil	5	12		Kg
72.05		Granules and powders, of pig iron, spiegeleisen, iron or steel.
	7205.10	- Granules	Nil	5	1		Kg
		- Powders :
	7205.21	--Of alloy steel	Nil	5	12		Kg
	7205.29	-- Other	Nil	5	12		Kg
		II, - IRON AND NON-ALLOY STEEL
72.06		Iron and non-alloy steel in ingots or other primary forms (excluding iron of heading No.72.03).
	7206.10	- Ingots	Nil	5	12		Kg
	7206.90	- Other	Nil	5	12		Kg
72.07		Semi-finished products of iron or non-alloy steel.
		- Containing by weight less than 0.25% of carbon:
	7207.11	-- Of rectangular (including square) cross-section, the width measuring less than twice the thickness	Nil	5	12		Kg
	7207.12	-- Other, of rectangular (other than square) cross-section	Nil	5	12		Kg
	7207.19	-- Other	Nil	5	12		Kg
	7207.20	- Containing by weight 0.25% or more of carbon	Nil	5	12		Kg
72.08		Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, hot-rolled, not clad, plated or coated.
	7208.10	- In coils, not further worked than hot-rolled, with patterns in relief.	2	5	1		Kg
		- Other, in coils, not further worked than hot-rolled, pickled:
	7208.25	-- Of a thickness of 4.75 mm or more	2	5	1		Kg
	7208.26	-- Of a thickness of 3 mm or more but less than 4.75 mm	2	5	1		Kg
	7208.27	-- Of a thickness of less than 3 mm	2	5	1		Kg
		- Other, in coils, not further worked than hot-rolled:
	7208.36	-- Of a thickness exceeding 10 mm	2	5	1		Kg
	7208.37	-- Of a thickness 4.75 mm or more but not exceeding 10 mm	2	5	1		Kg
	7208.38	-- Of a thickness 3 mm or more but less than 4.75 mm	2	5	1		Kg
	7208.39	-- Of a thickness of less than 3 mm	2	5	1		Kg

1Heading N.	H.S. Code	Description	CD	CBT	IC	Remarks	SUQ
	7208.40	- Not in coils, not further worked than hot-rolled, with patterns in relief	2	5	1		Kg
		- Other, not in coils, not further worked than hot-rolled:
	7208.51	- - Of a thickness exceeding 10 mm	2	5	1		Kg
	7208.52	- - OF a thickness of 4.75 mm or more but not exceeding 10 mm	2	5	1		Kg
	7208.53	- - Of a thickness of 3 mm or more but less than 4.75 mm	2	5	1		kg
	7208.54	- - Of a thickness of less than 3 mm	2	5	1		Kg
	7208.90	- Other
7209		Flat – rolled products of iron or non – alloy steel, of a width of 600 mm or more, cold – rolled (cold – reduced), not clad, plated or coated
		- In coils, Not further worked than cold – rolled (Cold – reduced):
	7209.15	- - Of a thickness of 3 mm or more	2	5	12		Kg
	7209.16	- - Of a thickness exceeding 1 mm but less than 3 mm	2	5	12		Kg
	7209.17	- - Of a thickness of 0.5 mm or more but not exceeding 1 mm	2	5	12		Kg
	7209.18	- - Of a thickness of less than 0.5 mm	2	5	12		Kg
		- Not in coils, not further worked than cold rolled (cold – reduced):
	7209.25	- - Of a thickness of 3 mm or more	2	5	12		Kg
	7209.26	- - Of a thickness exceeding 1 mm but less than 3 mm	2	5	12		Kg
	7209.27	- - Of a thickness of 0.5 mm or more but not exceeding 1 mm	2	5	12		Kg
	7209.28	- - Of a thickness of less than 0.5 mm	2	5	12		Kg
	7209.90	- Other	2	5	12		Kg
72.10		Flat – rolled products of iron or non – alloy steel, of a width of 600 mm or more, clad, plated or coated.
		- Plated or coated with tin:
	7210.11	- - Of a thickness f 0.5 mm or more	2	5	12		Kg
	7210.12	- - Of a thickness of less than 0.5 mm	2	5	12		Kg
	7210.20	- - Plated or coated with lead, including terne-plate	2	5	12		Kg
	7210.30	- - Electrolytically plated or coated with zinc	2	5	12		Kg
		- Otherwise plated or coated with zinc:
	7210.41	- - Corrugated	2	5	12		Kg
	7210.49	- - Other	2	5	12		Kg
	7210.50	- Plated or coated with chromium oxides or with chromium and chromium oxids	2	5	12		Kg
		- Plated or coated with aluminium:
	7210.61	- - Plated or coated with aluminium-zinc alloys	2	5	12		kg
	7210.69	- - Other	2	5	12		Kg
	7210.70	- - Painted, varnished or coated with plastics	2	5	12		Kg
	7210.90	- Other	2	5	12		kg

Heading N.	H.S. Code	Description	CD	CBT	IC	Remarks	SUQ
72.11		Flat-rolled products of iron or non-alloy steel, of a width of less than 600 mm, not clad, plated or coated.
		- Not further worked than hot-rolled:
	7211.13	- - Rolled on four faces or in a closed box pass, of a width exceeding 150 mm and a thickness of not less than 4 mm, not in coils and without patterns in relief	2	5	1		Kg
	7211.14	- - Other, of a thickness of 4.75 mm or more	2	5	1		Kg
	7211.19	- - Other	2	5	1		Kg
		- Not further worked than cold – rolled (Cold-reduced):
	7211.23	- - Containing by weight less than 0.25% of carbon	2	5	1		Kg
	7211.29	- - Other	2	5	1		Kg
	721.90	- Other	2	5	1		Kg
72.12		Flat-rolled products of iron or non – alloy steel, of a width of less than 600 mm, clad, plated or coated.
	7212.10	- Plated or coated with in	2	5	12		Kg
	7212.20	- Electrolytically plated or coated with zinc	2	5	12		Kg
	7212.30	- Otherwise plated or coated with zinc	2	5	12		Kg
	7212.40	- Painted, varnished or coated with plastics	2	5	12		Kg
	7212.50	- Otherwise plated or coats	2	5	12		Kg
	7212.60	- Clad
72.13		Bars and rods, hot-rolled, in irregularly wound coils, of iron or non-alloy steel.
	7213.10	- Containing indentations, ribs, grooves or other deformations produced during the rolling process	2	25	12		Kg
	7213.20	- Other, of free-cutting steel	2	25	12		Kg
		- Other:
	7213.91	- - Of circular cross-section measuring less than 14 mm in diameter	2	25	12		Kg
	7213.99	- - Other	2	25	12		Kg
72.14		Other bars and rods of iron or non – alloy steel, not further worked than forged, hot-rolled, hot-drawn or hot-extruded, but including those twisted after rolling.				@
	7214.10	- Forged	2	20	1		Kg
	7214.20	- Containing indentations, ribs, grooves or other deformations produced during the rolling process or twised after rolling	2	20	1		Kg
	7214.30	- Other, of free-cutting steel	2	20	1		Kg
		- Other:
	7214.91	- - Of rectangular (Other than square) cross-section	2	30	1		Kg
	7214.99	- - Other	2	30	1		Kg
72.15		Other bars and rods of iron or non-alloy steel				@
	7215.10	- Of free-cutting steel, not firther worked than cold-formed or cold-finished	2	30	12		Kg

@ Bars and rods covered by this subheading are subject to a CBT rate of 10% of the value.

Heading No.	H.S. Code	Description	CD	CBT	IC	Remarks	SUQ
	7215.50	- Other, not further worked than cold-formed or cold-finished	2	30	12		Kg
	7215.90	- Other	2	30	12		Kg
72.16		Angles, shapes and sections of iron or non-alloy steel,
	7216.10	- U, I or H sections, not further worked than hot-rolled, hot-drawn or extruded, of a height of less than 80 mm	2	10	12		Kg
		- L or T sections, not further worked than hot – rolled, hot-drawn or extruded, of a height of less than 800 mm:
	7216.21	-- L sections	2	10	12		Kg
	7216.22	-- T sections	2	10	12		Kg
		- U, I or H sections, not further worked than hot-rolled, hot-drawn or extruded of a height of 80 mm or more:
	7216.31	-- U sections	2	10	12		Kg
	7216.32	-- I sections	2	5	12		Kg
	7216.33	-- H sections	2	10	12		Kg
	7216.40	- L or T sections, not further worked than hot-rolled, hot-drawn or extruded, of a height of 80 mm or more	2	10	12		Kg
	7216.50	- Other angles, shapes and sections, not further worked than hot-rolled, hot-drawn or extruded	2	10	12		Kg
		- Angles, shapes and sections, not further worked than cold-formed or cold-finished:
	7216.61	-- Obtained from falt-rolled products	2	10	12		Kg
	7216.69	-- Other	2	10	12		Kg
		- Other:
	7216.91	-- Cold-formed or cold-finished from flat-rolled products	2	10	12		Kg
	7216.99	-- Other	2	10	12		Kg
72.17		Wire of iron or non-alloy steel
	7217.10	- Not plated or coated, whether or not polished	2	30	12		Kg
	7217.20	- Plated or coated with zinc	2	30	12		Kg
	7217.30	- Plated or coated with other base metals	2	30	12		Kg
	7217.90	- Other	2	30	12		Kg
		III- STAINLESS STEEL
72.18		Stainless steel in ingots or other primary forms; semi-finished products of stainless steel.
	7218.10<